提交

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -0,0 +1,363 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Mono auto generated files
+mono_crash.*
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Ww][Ii][Nn]32/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Oo]ut/
+[Ll]og/
+[Ll]ogs/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUnit
+*.VisualState.xml
+TestResult.xml
+nunit-*.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# ASP.NET Scaffolding
+ScaffoldingReadMe.txt
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Coverlet is a free, cross platform Code Coverage Tool
+coverage*.json
+coverage*.xml
+coverage*.info
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# NuGet Symbol Packages
+*.snupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+*.appxbundle
+*.appxupload
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- [Bb]ackup.rdl
+*- [Bb]ackup ([0-9]).rdl
+*- [Bb]ackup ([0-9][0-9]).rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
+
+# Backup folder for Package Reference Convert tool in Visual Studio 2017
+MigrationBackup/
+
+# Ionide (cross platform F# VS Code tools) working folder
+.ionide/
+
+# Fody - auto-generated XML schema
+FodyWeavers.xsd

Models/Entity.cs

@@ -1,5 +1,7 @@
 using System;
 using System.Collections.Generic;
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
 using System.Linq;
 using System.Text;
 using System.Threading.Tasks;
@@ -15,10 +17,26 @@ namespace TaskManager.Controllers
     {
         Task ExecuteAsync();
     }
+
+
+    public class BaseEntity
+    {
+        [Key]
+        [DatabaseGenerated(DatabaseGeneratedOption.Identity)]
+        public long UId { get; set; }
+        public bool WriteState { get; set; }
+        public bool ReadState { get; set; }
+
+        public DateTime CreationTime{get;set;}
+
+        public string  Remark { get; set; }
+
+
+    }
     /// <summary>
     /// 供应商基础信息：记录供应商的基本资料、联系方式、资质等信息
     /// </summary>
-    public class SupplierBaseInfo
+    public class SupplierBaseInfo : BaseEntity
     {
 
 
@@ -28,34 +46,34 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 人员资质信息：存储生产、质检等人员的资质证书、培训记录等
     /// </summary>
-    public class PersonnelQualificationInfo { }
+    public class PersonnelQualificationInfo : BaseEntity { }
 
     /// <summary>
     /// BOM主数据：物料清单，定义产品结构和组成关系
     /// </summary>
-    public class BOMMasterData { }
+    public class BOMMasterData : BaseEntity { }
 
     /// <summary>
     /// 物料主数据：记录原材料、半成品、成品的基本属性和参数
     /// </summary>
-    public class MaterialMasterData { }
+    public class MaterialMasterData : BaseEntity { }
 
     /// <summary>
     /// 工艺装备：生产过程中使用的工具、模具、夹具等信息
     /// </summary>
-    public class ProcessEquipment { }
+    public class ProcessEquipment : BaseEntity { }
 
     /// <summary>
     /// 工艺：产品制造过程的工艺路线、参数和方法
     /// </summary>
-    public class ProcessTechnology { }
+    public class ProcessTechnology : BaseEntity { }
     #endregion
 
     #region 计划数据
     /// <summary>
     /// 整车月度生产计划：月度整车生产数量、车型、时间安排等计划信息
     /// </summary>
-    public class MonthlyProductionPlan
+    public class MonthlyProductionPlan:BaseEntity
     {
         /// <summary>
         /// 主键        
@@ -155,7 +173,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// M+6月物料需求计划：未来6个月的物料需求预测和计划
     /// </summary>
-    public class MaterialRequirementPlanM6
+    public class MaterialRequirementPlanM6 : BaseEntity
     {
         /// <summary>
         /// 主键        
@@ -267,7 +285,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 日物料需求计划：每日生产所需的物料明细和数量计划
     /// </summary>
-    public class DailyMaterialRequirementPlan
+    public class DailyMaterialRequirementPlan : BaseEntity
     {
         /// <summary>
         /// 主键        
@@ -456,7 +474,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 计划协议：与供应商签订的长期采购框架协议
     /// </summary>
-    public class PlanningAgreement
+    public class PlanningAgreement : BaseEntity
     {
         /// <summary>
         /// 主键        
@@ -525,7 +543,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 采购订单：向供应商发出的具体采购请求和合同
     /// </summary>
-    public class PurchaseOrder
+    public class PurchaseOrder : BaseEntity
     {
         /// <summary>
         /// 主键        
@@ -639,59 +657,63 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 来料检验数据：原材料到货检验的结果和记录
     /// </summary>
-    public class IncomingInspectionData { }
+    public class IncomingInspectionData : BaseEntity {
+    
+    
+    
+    }
 
     /// <summary>
     /// 排产数据：生产任务的具体安排和调度信息
     /// </summary>
-    public class ProductionSchedulingData { }
+    public class ProductionSchedulingData : BaseEntity { }
 
     /// <summary>
     /// 过程控制项质量数据：生产过程中关键控制点的质量检测数据
     /// </summary>
-    public class ProcessControlQualityData { }
+    public class ProcessControlQualityData : BaseEntity { }
 
     /// <summary>
     /// 生产过程数据：记录产品生产过程中的工艺参数、设备状态等信息
     /// </summary>
-    public class ProductionProcessData { }
+    public class ProductionProcessData : BaseEntity { }
 
     /// <summary>
     /// 产品一次合格率：产品首次通过所有检验的比例数据
     /// </summary>
-    public class FirstPassYield { }
+    public class FirstPassYield : BaseEntity { }
 
     /// <summary>
     /// 工位一次合格率：各个生产工位的首次通过率数据
     /// </summary>
-    public class WorkstationFirstPassYield { }
+    public class WorkstationFirstPassYield : BaseEntity { }
 
     /// <summary>
     /// 缺陷业务数据：产品生产过程中发现的缺陷类型、数量和处理情况
     /// </summary>
-    public class DefectBusinessData { }
+    public class DefectBusinessData : BaseEntity { }
 
     /// <summary>
     /// 环境业务数据：生产环境相关的数据，如温度、湿度、洁净度等
     /// </summary>
-    public class EnvironmentalBusinessData { }
+    public class EnvironmentalBusinessData : BaseEntity { }
 
     /// <summary>
     /// 设备OEE达成率：设备综合效率的达成情况和统计数据
     /// </summary>
-    public class EquipmentOEE { }
+    public class EquipmentOEE : BaseEntity { }
 
     /// <summary>
     /// OEE时间明细：设备OEE计算中的时间构成明细（运行、停机、空闲等）
     /// </summary>
-    public class OEETimeDetails { }
+    public class OEETimeDetails : BaseEntity { }
     #endregion
 
     #region 物流配送数据
     /// <summary>
     /// 过焊装未过总装：已完成焊装但尚未进入总装阶段的车辆信息
     /// </summary>
-    public class WeldingToAssemblyVehicles
+    public class WeldingToAssemblyVehicles : BaseEntity
     {
         /// <summary>
         /// 主键        
@@ -760,7 +782,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 过涂装未过总装：已完成涂装但尚未进入总装阶段的车辆信息
     /// </summary>
-    public class PaintingToAssemblyVehicles
+    public class PaintingToAssemblyVehicles : BaseEntity
     {
 
         /// <summary>
@@ -833,7 +855,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 排序供货：按照生产顺序进行物料供应的相关数据
     /// </summary>
-    public class SequencedSupply
+    public class SequencedSupply : BaseEntity
     {
 
         /// <summary>
@@ -926,7 +948,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 看板配送单：基于看板管理的物料配送单据和执行情况
     /// </summary>
-    public class KanbanDeliveryNote
+    public class KanbanDeliveryNote : BaseEntity 
     {   /// <summary>
         /// 主键        
         /// </summary>
@@ -951,10 +973,7 @@ namespace TaskManager.Controllers
         /// 零件名称
         /// </summary>
         public string materialDescription { get; set; }
-        /// <summary>
-        /// 物料描述
-        /// </summary>
-        public string materialDescription { get; set; }
+      
         /// <summary>
         /// 工厂代码
         /// </summary>
@@ -1013,7 +1032,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 退货单：记录不合格品或多余物料退回供应商的单据
     /// </summary>
-    public class ReturnGoodsNote
+    public class ReturnGoodsNote : BaseEntity 
     {   /// <summary>
         /// 主键        
         /// </summary>
@@ -1109,7 +1128,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 奇瑞RDC共享库存：奇瑞区域配送中心的共享库存信息
     /// </summary>
-    public class CheryRDCSharedInventory
+    public class CheryRDCSharedInventory : BaseEntity
     {
         /// <summary>
         /// 主键        
@@ -1172,7 +1191,7 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 日MRP状态监控：每日物料需求计划的执行状态和监控数据
     /// </summary>
-    public class DailyMRPStatusMonitoring
+    public class DailyMRPStatusMonitoring : BaseEntity
     {
 
         /// <summary>
@@ -1285,24 +1304,24 @@ namespace TaskManager.Controllers
     /// <summary>
     /// 日MRP预警推移：每日物料需求计划的预警情况和趋势分析
     /// </summary>
-    public class DailyMRPWarningTrend { }
+    public class DailyMRPWarningTrend : BaseEntity { }
 
     /// <summary>
     /// 供应商共享库存-上午：供应商共享库存的上午时点数据
     /// </summary>
-    public class SupplierSharedInventoryMorning { }
+    public class SupplierSharedInventoryMorning : BaseEntity { }
 
     /// <summary>
     /// 供应商共享库存-晚上：供应商共享库存的晚上时点数据
     /// </summary>
-    public class SupplierSharedInventoryEvening { }
+    public class SupplierSharedInventoryEvening : BaseEntity { }
     #endregion
 
     #region 其他数据
     /// <summary>
     /// 附件类数据：与生产过程相关的文档、图片、图纸等附件信息
     /// </summary>
-    public class AttachmentData { }
+    public class AttachmentData : BaseEntity { }
     #endregion
 
 }

WpfApp4/Controllers/BaseController.cs

@@ -0,0 +1,163 @@
+
+using Microsoft.Extensions.Options;
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Net.Http;
+using System.Security.Cryptography;
+using System.Text;
+using System.Text.Json;
+using System.Text.Json.Serialization;
+using System.Text.RegularExpressions;
+using System.Threading.Tasks;
+using WpfApp4;
+
+
+namespace TaskManager.Controllers
+{
+    public class BaseController:IDoExecute    {
+
+        protected  string appKey = "8EG566b9bedd2bf46d";
+        protected  string appSecret = "48edc4425647425d87f806a1ba492580";
+        protected  string baseNo = "13";
+        protected  string DomainUrl = App.HangfireConfig.Url; // 正式环境
+        protected  HttpClient _httpClient;
+    
+        public BaseController()
+        {
+             _httpClient =new HttpClient();
+        }
+        /// <summary>
+        /// 
+        /// </summary>
+        /// <param name="url">全路径调用</param>
+        /// <param name="jsonData"></param>
+        /// <param name=""></param>
+        /// <returns></returns>
+        protected  async Task<string> Post(string url, string jsonData,string route)
+        {
+            //error = string.Empty;
+            try
+            {
+                // 生成签名参数
+                string timeStamp = GetCurrentTimestamp();
+                string nonce = GenerateNonce();
+             
+                var sign = GenerateSign(HttpMethod.Post.Method, route, appKey, appSecret, timeStamp, nonce, jsonData);
+              
+                // 构建请求
+                var request = new HttpRequestMessage(HttpMethod.Post, url);
+                request.Content = new StringContent(jsonData, Encoding.UTF8, "application/json");
+                request.Headers.Add("appKey", appKey);
+                request.Headers.Add("appSecret", appSecret);
+                request.Headers.Add("timestamp", timeStamp);
+                request.Headers.Add("sign", sign);
+                request.Headers.Add("nonce", nonce);
+                // 发送请求
+                var response = await _httpClient.SendAsync(request);
+                response.EnsureSuccessStatusCode(); // 抛出异常处理状态码
+                return await response.Content.ReadAsStringAsync();
+            }
+            catch (HttpRequestException ex)
+            {
+                //error = ex.Message;
+                return string.Empty;
+            }
+        }
+        private string GenerateSign(string method, string path, string appKey, string appSecret, string timestamp, string nonce, string jsonBody)
+        {
+            // 按照规则拼接参数
+            string paramStr = $"method={method.ToUpper()}&path={path}&appKey={appKey}&appSecret={appSecret}&timestamp={timestamp}&nonce={nonce}&jsonBody={jsonBody}";
+            return ComputeSHA512(paramStr);
+
+        }
+        private string ComputeSHA512(string input)
+        {
+            using (SHA512 sha512 = SHA512.Create())
+            {
+                byte[] bytes = Encoding.UTF8.GetBytes(input);
+                byte[] hash = sha512.ComputeHash(bytes);
+
+                StringBuilder builder = new StringBuilder();
+                for (int i = 0; i < hash.Length; i++)
+                {
+                    builder.Append(hash[i].ToString("x2")); // "x2" 表示小写十六进制
+                }
+                return builder.ToString();
+            }
+        }
+        private static string RemoveWhitespace(string input)
+        {
+            if (string.IsNullOrEmpty(input))
+                return input;
+            // 使用正则表达式移除空格和换行
+            return Regex.Replace(input, @"[\s]+", "");
+        }
+
+        private string GetCurrentTimestamp()
+        {
+            return ((long)(DateTime.UtcNow - new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc)).TotalMilliseconds).ToString();
+        }
+
+        private string GenerateNonce()
+        {
+            const string chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
+            Random random = new Random();
+            int length = random.Next(10, 51);
+            return new string(Enumerable.Repeat(chars, length)
+              .Select(s => s[random.Next(s.Length)]).ToArray());
+        }
+
+        public async Task ExecuteAsync()
+        {
+            var str=JsonSerializer.Serialize(new SupplierPlanRequest(),
+               new JsonSerializerOptions
+               {
+                   PropertyNamingPolicy = JsonNamingPolicy.CamelCase,
+                   WriteIndented = true // 可选，用于格式化输出
+               }
+               );
+            str = RemoveWhitespace(str);
+           var ret =await Post("https://ediuat.mychery.com/prod-api/api-apply/v2/get/supplierProPlaning",str, "/v2/get/supplierProPlaning");
+        }
+    }
+
+    public class SupplierPlanRequest
+    {
+       
+        public string Date { get; set; } = DateTime.Today.ToString("yyyy-MM-dd"); // 默认当前日期
+      
+        public int PageSize { get; set; } = 1000; // 最大值 1000
+    
+        public int PageNum { get; set; } = 1; // 从 1 开始
+    
+        public bool IsForce { get; set; } = false; // 默认非强制获取
+    }
+
+    // 响应数据模型（根据文档示例响应定义）
+    public class SupplierPlanResponse
+    {
+        public int Total { get; set; }
+        public int PageNum { get; set; }
+        public int PageSize { get; set; }
+        public List<PlanData> Rows { get; set; } = new List<PlanData>();
+    }
+
+    public class PlanData
+    {
+        public int Id { get; set; }
+        public string ReleaseEdition { get; set; }
+        public string Models { get; set; }
+        public string SalseDepartment { get; set; }
+        public string Type { get; set; }
+        public string Assembly { get; set; }
+        // 按文档响应示例补充其他字段...
+    }
+
+
+
+
+
+
+
+}

WpfApp4/JobDbContext.cs

@@ -1,16 +1,16 @@
-using Microsoft.EntityFrameworkCore;
+using Dapper;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.EntityFrameworkCore.ChangeTracking;
+using Microsoft.EntityFrameworkCore.Infrastructure;
+using Microsoft.EntityFrameworkCore.Metadata;
+using Models;
+using System;
 using System;
 using System.Collections.Generic;
 using System.Linq;
 using System.Text;
 using System.Threading.Tasks;
-
-using Microsoft.EntityFrameworkCore.ChangeTracking;
-using Microsoft.EntityFrameworkCore.Infrastructure;
-using Microsoft.EntityFrameworkCore.Metadata;
-using System;
-using Dapper;
-using Models;
+using TaskManager.Controllers;
 
 
 namespace WpfApp4
@@ -34,7 +34,46 @@ namespace WpfApp4
             // 配置数据库连接字符串
             optionsBuilder.UseSqlServer(App.HangfireConfig.ConnectionString);
         }
-        public DbSet<Logs> Log { set; get; }
+        public DbSet<SupplierBaseInfo> SupplierBaseInfos { get; set; }
+        public DbSet<PersonnelQualificationInfo> PersonnelQualificationInfos { get; set; }
+        public DbSet<BOMMasterData> BOMMasterDatas { get; set; }
+        public DbSet<MaterialMasterData> MaterialMasterDatas { get; set; }
+        public DbSet<ProcessEquipment> ProcessEquipments { get; set; }
+        public DbSet<ProcessTechnology> ProcessTechnologies { get; set; }
+
+        // 计划数据
+        public DbSet<MonthlyProductionPlan> MonthlyProductionPlans { get; set; }
+        public DbSet<MaterialRequirementPlanM6> MaterialRequirementPlanM6s { get; set; }
+        public DbSet<DailyMaterialRequirementPlan> DailyMaterialRequirementPlans { get; set; }
+        public DbSet<PlanningAgreement> PlanningAgreements { get; set; }
+        public DbSet<PurchaseOrder> PurchaseOrders { get; set; }
+
+        // 生产过程数据
+        public DbSet<IncomingInspectionData> IncomingInspectionDatas { get; set; }
+        public DbSet<ProductionSchedulingData> ProductionSchedulingDatas { get; set; }
+        public DbSet<ProcessControlQualityData> ProcessControlQualityDatas { get; set; }
+        public DbSet<ProductionProcessData> ProductionProcessDatas { get; set; }
+        public DbSet<FirstPassYield> FirstPassYields { get; set; }
+        public DbSet<WorkstationFirstPassYield> WorkstationFirstPassYields { get; set; }
+        public DbSet<DefectBusinessData> DefectBusinessDatas { get; set; }
+        public DbSet<EnvironmentalBusinessData> EnvironmentalBusinessDatas { get; set; }
+        public DbSet<EquipmentOEE> EquipmentOEEs { get; set; }
+        public DbSet<OEETimeDetails> OEETimeDetailses { get; set; }
+
+        // 物流配送数据
+        public DbSet<WeldingToAssemblyVehicles> WeldingToAssemblyVehicleses { get; set; }
+        public DbSet<PaintingToAssemblyVehicles> PaintingToAssemblyVehicleses { get; set; }
+        public DbSet<SequencedSupply> SequencedSupplies { get; set; }
+        public DbSet<KanbanDeliveryNote> KanbanDeliveryNotes { get; set; }
+        public DbSet<ReturnGoodsNote> ReturnGoodsNotes { get; set; }
+        public DbSet<CheryRDCSharedInventory> CheryRDCSharedInventories { get; set; }
+        public DbSet<DailyMRPStatusMonitoring> DailyMRPStatusMonitorings { get; set; }
+        public DbSet<DailyMRPWarningTrend> DailyMRPWarningTrends { get; set; }
+        public DbSet<SupplierSharedInventoryMorning> SupplierSharedInventoryMornings { get; set; }
+        public DbSet<SupplierSharedInventoryEvening> SupplierSharedInventoryEvenings { get; set; }
+
+        // 其他数据
+        public DbSet<AttachmentData> AttachmentDatas { get; set; }
         // 配置实体映射
         protected override void OnModelCreating(ModelBuilder modelBuilder)
         {