using System.ComponentModel;

namespace CK.SCP.Models.Enums
{
    public enum BillType
    {
        [Description("原料收货")]
        MaterialReceive = 101,
        [Description("原料入库")]
        MaterialIn = 102,
        [Description("原料出库")]
        MaterialDeliver = 103,
        [Description("生产叫料")]
        MaterialAsk = 104,
        [Description("原料退货")]
        MatertialReturn = 105,
        [Description("生产退库")]
        MaterialBack = 106,


        [Description("委外出库")]
        OutsourceDeliver = 109,

        //        [Description("原料退货")]
        //        MaterialBack = 105,
        //        [Description("生产退库")]
        //        MaterialReturn = 106,

        [Description("成品收货")]
        ProductReceive = 201,
        [Description("成品入库")]
        ProductIn = 202,
        [Description("成品发货")]
        DeliverPlan = 204,
        [Description("客户退货")]
        ProductReturn = 205,
        [Description("成品顺序发货")]
        ProductSortedDeliver = 206,
        [Description("成品销售")]
        ProductSell = 207,
        [Description("成品返修")]
        ProductRepair = 208,

        [Description("委外入库")]
        OutsourceReceive = 209,


        [Description("其它入库")]
        OtherIn = 300,
        [Description("其它出库")]
        OtherOut = 301,
        [Description("移库")]
        StockMove = 302,
        [Description("打包")]
        StockPack = 303,
        [Description("拆包")]
        StockUnpack = 304,
        [Description("盘点计划")]
        InventoryPlan = 305,
        [Description("结算比对")]
        BalanceCompare = 307,
        [Description("盘点库位")]
        InventoryLoc = 306,

        [Description("器具初始化")]
        EqptRecover = 401,
        [Description("器具保养")]
        EqptMaintain = 402,
        [Description("器具报废")]
        EqptScrap = 403,
        [Description("码托")]
        EqptLoad = 404,

        [Description("JIS收货")]
        VinReceive = 501,
        [Description("JIS发货")]
        VinDeliver = 502,
        [Description("JIS销售")]
        VinSell = 503,

        [Description("报检")]
        Inspect = 601,
        [Description("追溯")]
        TraceBack = 602,
        [Description("备货单")]
        PickPlan = 603,
        [Description("发料单")]
        PickFact = 604,
        [Description("生产计划")]
        ProducePlan = 605,
        [Description("生产订单")]
        ManuOrder = 607,
        [Description("不合格品单")]
        UnqualifiedProd = 608,
        [Description("设备点检模板")]
        CheckModeEquipment = 609,
        [Description("设备点检单")]
        CheckBillEquipment = 610,
        [Description("产品点检模板")]
        CheckModeProduct = 611,
        [Description("产品点检单")]
        CheckBillProduct = 612,
        [Description("首检模板")]
        SpotInspectFirstMode = 613,
        [Description("首检单")]
        SpotInspectionFirst = 615,
        [Description("巡检模板")]
        SpotInspectMedMode = 616,
        [Description("巡检单")]
        SpotInspectionMed = 617,
        [Description("末检模板")]
        SpotInspectLastMode = 618,
        [Description("末检单")]
        SpotInspectionLast = 619,
        [Description("停线单")]
        LineStopBill = 620,
        [Description("产线识别码")]
        WorkLineDoc = 621,
        [Description("工位识别码")]
        WorkStationDoc = 622,
        [Description("路由识别码")]
        RouteDoc = 623,
        [Description("工位拆解识别码")]
        RouteBOMDoc = 624,
        [Description("参数识别码")]
        RoutePDoc = 625,
        [Description("工位部件识别码")]
        MachinePart = 626,
        [Description("停线发通知编号")]
        LineStopNoticeBill = 627,
        [Description("停线预计处理编号")]
        LineStopPrepareBill = 628,
        [Description("措施编号")]
        LineStopMeasureBill = 629,
        [Description("点检表编号")]
        CheckCode = 630,

        ReHandleVin = 701,
        [Description("采购订单")]
        PuchaseOrder = 702,
        [Description("发货单")]
        AsnOrder = 703,
        [Description("销售订单")]
        SaleOrder = 704,


        [Description("确认订单")]
        PO = 704,
        [Description("收货")]
        Receive = 704,
        [Description("条码")]
        BarCode = 704,
        [Description("发票")]
        Invoice = 704,


    }
}