三方比对优化

code/src/Modules/SettleAccount/src/SettleAccount.Job/Services/Report/JisBBACSaSeEdiCompareExportService.cs

@@ -76,19 +76,25 @@ namespace SettleAccount.Job.Services.Report
 
             HandleSaSeEdiCompareDiffList(saSeEdiCompareDiffs);
 
+            //var sa1 = saSeEdiCompareDiffs.FindAll(t => t.PN == "3819841").ToList();
+            //var sa2 = sa1.FindAll(t => t.SaCustomerPartCode == "A2068808405").ToList();
+
+            //saSeEdiCompareDiffs = saSeEdiCompareDiffs.FindAll(t => t.PN == "3819841").ToList();
+
+
             #region 二次对比
             //二次匹配上的记录
-            var secondMatchHaveSaHaveSes = HandleSecondCompare(saSeEdiCompareDiffs, businessType);
-            if (secondMatchHaveSaHaveSes.Any())
-            {
-                //二次匹配 匹配上的厂内零件号、PN
-                var secondMatchFPartCodePNs = secondMatchHaveSaHaveSes.Select(t => new { t.ReplaceFactoryPartCode, t.PN });
-                saSeEdiCompareDiffs.RemoveAll<SaSeEdiCompareDiff>(t => secondMatchFPartCodePNs.Contains(new { t.ReplaceFactoryPartCode, t.PN }));
-                saSeEdiCompareDiffs.AddRange(secondMatchHaveSaHaveSes);
-                //二次对比比对上的数据入库
-                var seCDetailEntitys = _objectMapper.Map<List<SaSeEdiCompareDiff>, List<BBAC_SEC_DETAIL>>(secondMatchHaveSaHaveSes);
-                _settleAccountDbContext.Set<BBAC_SEC_DETAIL>().AddRange(seCDetailEntitys);
-            }
+            //var secondMatchHaveSaHaveSes = HandleSecondCompare(saSeEdiCompareDiffs, businessType);
+            //if (secondMatchHaveSaHaveSes.Any())
+            //{
+            //    //二次匹配 匹配上的厂内零件号、PN
+            //    var secondMatchFPartCodePNs = secondMatchHaveSaHaveSes.Select(t => new { t.ReplaceFactoryPartCode, t.PN });
+            //    saSeEdiCompareDiffs.RemoveAll<SaSeEdiCompareDiff>(t => secondMatchFPartCodePNs.Contains(new { t.ReplaceFactoryPartCode, t.PN }));
+            //    saSeEdiCompareDiffs.AddRange(secondMatchHaveSaHaveSes);
+            //    //二次对比比对上的数据入库
+            //    var seCDetailEntitys = _objectMapper.Map<List<SaSeEdiCompareDiff>, List<BBAC_SEC_DETAIL>>(secondMatchHaveSaHaveSes);
+            //    _settleAccountDbContext.Set<BBAC_SEC_DETAIL>().AddRange(seCDetailEntitys);
+            //}
             #endregion
 
             #region 结算数据处理
@@ -200,7 +206,7 @@ namespace SettleAccount.Job.Services.Report
                                FactoryPartCode = groupItem.Max(t => t.FactoryPartCode),
                                ToLoc = groupItem.Max(t => t.ToLoc),
                                ErpToLoc = groupItem.Max(t => t.ErpToLoc)
-                           }).Where(t => t.Qty != 0M);
+                           }).Where(t => t.Qty > 0M);
             //Edi
             //var ediGroup = from edi in _settleAccountDbContext.Set<BBAC_SE_EDI>()
             //               where edi.IsDeleted == false && edi.IsHaveSeData == true && edi.State == 0

code/src/Modules/SettleAccount/src/SettleAccount.Job/Services/Report/JisHBPOSaSeEdiCompareExportService.cs

@@ -78,17 +78,17 @@ namespace SettleAccount.Job.Services.Report
 
             #region 二次对比
             //二次匹配上的记录
-            var secondMatchHaveSaHaveSes = HandleSecondCompare(saSeEdiCompareDiffs, businessType);
-            if (secondMatchHaveSaHaveSes.Any())
-            {
-                //二次匹配 匹配上的厂内零件号、PN
-                var secondMatchFPartCodePNs = secondMatchHaveSaHaveSes.Select(t => new { t.ReplaceFactoryPartCode, t.PN });
-                saSeEdiCompareDiffs.RemoveAll<SaSeEdiCompareDiff>(t => secondMatchFPartCodePNs.Contains(new { t.ReplaceFactoryPartCode, t.PN }));
-                saSeEdiCompareDiffs.AddRange(secondMatchHaveSaHaveSes);
-                //二次对比比对上的数据入库
-                var seCDetailEntitys = _objectMapper.Map<List<SaSeEdiCompareDiff>, List<HBPO_SEC_DETAIL>>(secondMatchHaveSaHaveSes);
-                _settleAccountDbContext.Set<HBPO_SEC_DETAIL>().AddRange(seCDetailEntitys);
-            }
+            //var secondMatchHaveSaHaveSes = HandleSecondCompare(saSeEdiCompareDiffs, businessType);
+            //if (secondMatchHaveSaHaveSes.Any())
+            //{
+            //    //二次匹配 匹配上的厂内零件号、PN
+            //    var secondMatchFPartCodePNs = secondMatchHaveSaHaveSes.Select(t => new { t.ReplaceFactoryPartCode, t.PN });
+            //    saSeEdiCompareDiffs.RemoveAll<SaSeEdiCompareDiff>(t => secondMatchFPartCodePNs.Contains(new { t.ReplaceFactoryPartCode, t.PN }));
+            //    saSeEdiCompareDiffs.AddRange(secondMatchHaveSaHaveSes);
+            //    //二次对比比对上的数据入库
+            //    var seCDetailEntitys = _objectMapper.Map<List<SaSeEdiCompareDiff>, List<HBPO_SEC_DETAIL>>(secondMatchHaveSaHaveSes);
+            //    _settleAccountDbContext.Set<HBPO_SEC_DETAIL>().AddRange(seCDetailEntitys);
+            //}
             #endregion
 
             #region 结算数据处理
@@ -198,7 +198,7 @@ namespace SettleAccount.Job.Services.Report
                                FactoryPartCode = groupItem.Max(t => t.FactoryPartCode),
                                ToLoc = groupItem.Max(t => t.ToLoc),
                                ErpToLoc = groupItem.Max(t => t.ErpToLoc)
-                           }).Where(t => t.Qty != 0M);
+                           }).Where(t => t.Qty > 0M);
 
             //Edi
             //var ediGroup = from edi in _settleAccountDbContext.Set<HBPO_SE_EDI>()

code/src/Modules/SettleAccount/src/SettleAccount.Job/Services/Report/SaSeEdiCompareExportBaseService.cs

@@ -264,6 +264,8 @@ namespace SettleAccount.Job.Services.Report
 
             //有结算有发运
             var haveSaHaveSeExports = saSeEdiCompareDetailExports.FindAll(t => new EnumSaSeEdiCompareCategory[] { EnumSaSeEdiCompareCategory.HaveSaHaveSeHaveEdi, EnumSaSeEdiCompareCategory.HaveSaHaveSeNotHaveEdi }.Contains(t.Category));
+
+            
             //有结算有发运汇总
             var haveSaHaveSeSumExports = haveSaHaveSeExports.GroupBy(p => p.ReplaceFactoryPartCode).Select(p => new SaSeEdiCompareSumReport()
             {